NEO DUR ROADMARKING (SABS 731-1)
    PRODUCT CODE: RM00
    TECHNICAL DATA SHEET NO. 06-Specialised Products
    JULY 2009

  1. Product Description

    A classic, modified alkyd based, interior / exterior, low sheen roadmarking finish for unpainted bricks, cement, concrete, stone, bituminous and tarmac road surfaces to protect substrates from abrasion, rain and sun. Meets the rigorous requirements of SABS 731 Type 1.
  2. Application Areas

    Bricks, cement, concrete, stone, bituminous and tarmac road surfaces on roads, airfields, parking areas and driveways.Bricks, cement, concrete, stone, bituminous and tarmac road surfaces on roads, airfields, parking areas and driveways.
  3. Product Features

    High abrasion resistance and durability.
    Excellent adhesion to a range of properly prepared road surface types.
    NEO Dur Roadmarking contains highly reflective minerals for high visibility in parking and other areas.
    Meets SABS 731 Type 1 standards.
    Suitable for machine application as well as with a paint roller or brush.
    Serves as a base coating for the application of reflective glass beads.
    Available in the different shades required by municipalities and road authorities.
    One coat of NEO Dur Roadmarking is used for best results.
  4. Product Data

    Resin Base Combination of synthetic resins
    Drying Time Touch dry: 10-15 minutes
    Hard dry: 1 - 2 hours
    Solid Matter by Content By volume: 48,2%
    By mass: 70,3%
    Film Thickness 150-300 microns
    Spreading Rate 2 7 square metres per litre.
    Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 2-4 square metres per litre for the first coat and 5-7 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
    Surface Appearance Silky sheen
  5. Application Details

    Mixing Always stir well before use with a flat paddle.
    Application Method Suitable for machine application as well as with a paint roller or brush.
    Thinning NEO Dur Roadmarking is ready for use un-thinned; thinning with NEO Toluol (tl00) will reduce its efficacy/hiding power.
    Only in case of machine application, thin with NEO Toluol (tl00).
    Cleaning NEO Toluol (tl00).
    Application Stir well before use.
    One coat of NEO Dur Roadmarking is used for best results.
    With brush, roller or spray, apply a generous coat of NEO Dur Roadmarking.
    NEO Dur Roadmarking is ready for use un-thinned; thinning will reduce its efficacy/hiding power. NEO Toluol (tl00) should be added only in case of machine application.
    Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 2-4 square metres per litre for the first coat and 5-7 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
    Clean up application equipment with NEO Toluol (tl00).
    Only apply in well ventilated areas.
    This material is highly flammable. Keep away from all ignition sources, flames and sparks.
    Do not eat, drink or smoke while applying.
    Do not apply before 09:00 and after 16:00 in the winter.
    Do not apply exterior if it looks like rain will occur within 4-6 hours of application.
  6. Surface Preparation

    Uncoated Concrete, Cement, Stone and Brick Surfaces

    Tarmac and Bitumen

    Previous road markings
    Substrate must be completely dry and free of dust.
    Remove all dust, foreign material, fungal and algae growth. 
    Fill and seal all visible cracks with a suitable flexible sealant.
    Remove any old flaking paint coatings.
    Apply one coat of NEO Dur Roadmarking to cover substrate well.
    For use on concrete, two applications are recommended.
    No primer is required.
  7. Colour Range and Quantities

    NEO Dur Roadmarking is available in White, Yellow, Red and Black.
    Available in 1 litre, 5 litres, 20 litres and 200 litres.
  8. Precautions

    NEO Dur Roadmarking is highly flammable. 
    Keep away from all ignition sources, flames and sparks.
    Only apply in well ventilated areas.
    Avoid inhaling vapours. Constant inhaling of vapours can lead to drowsiness. Expose person to fresh air and symptoms will disappear.
    Do not eat, drink or smoke while applying.
  9. Disclaimer

    NEO Paints can not be held liable if the product fails due to improper surface preparation or application.