NEO STONE SEALER
    SOLVENT BASED (INTERIOR)
    PRODUCT CODE: SS10
    TECHNICAL DATA SHEET NO. 05-Lacquers & Varnishes
    JULY 2009

  1. Product Description

    NEO Stone Sealer (solvent based) is an interior, clear, glossy coating of exceptional surface hardness and wear resistance.
  2. Application Areas

    Interior use only.
    On sound stone surfaces / tiles.
    The product is an ideal clear protective coating for stone/tiles floors.
  3. Product Features

    Impedes dirt collection.
    Improves film hardness, abrasion resistance and cleanability.
    Two to three coats of NEO Stone Sealer (solvent based) are used for best results.
    Should be used interior only. It may be used on the exterior of buildings in passeges etc. that are well covered up. Direct sunlight will deteriorate the coating.
  4. Product Data

    Resin Base Acrylic solution polymer
    Drying Time Touch dry: 30 min
    Hard dry: 2 hours
    Solid Matter by Content By mass: 25%
    Film Thickness 20 microns
    Spreading Rate 10-12 square metres per litre.
    Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 10-12 square metres per litre for the first coat and 12-14 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
    Surface Appearance Glossy
  5. Application Details

    Mixing Always stir well before use with a flat paddle.
    Application Method Paintbrush or roller.
    Thinning NEO Stone Sealer (solvent based) is ready for use un-thinned; thinning with NEO M-Thinners (mt01) will reduce its effectiveness.
    Cleaning NEO M-Thinners (mt01).
    Application Stir well before use.
    Two to three coats of NEO Stone Sealer (solvent based) are used for best results.
    With brush or roller, apply a generous coat of NEO Stone Sealer (solvent based).
    Allow to dry 6-8 hours before recoating.
    With brush or roller, apply further two to three generous coats.
    Clean up application equipment with NEO M-Thinners (mt01).
    NEO Stone Sealer (solvent based) is ready for use un-thinned; thinning will reduce its effectiveness.
    Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 10-12 square metres per litre for the first coat and 12-14 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates.
    For interior use only. 
    Do not apply before 09:00 and after 16:00 in the winter.
  6. Surface Preparation

    On Sound, Clean Water Based Emulsion Paint Coatings (Previously Painted Surfaces) Remove all dust, foreign material, fungal and algae growth.
    Allow to dry.
    With brush or roller, apply a generous coat of NEO Stone Sealer (solvent based).
    Allow to dry 6-8 hours before recoating.
    With brush or roller, apply further two to three generous coats.
  7. Colour Range and Quantities

    NEO Stone Sealer (solvent based) is a clear, colourless coating.
    Available in 1 litre and 5 litres (20 litres on special order).
  8. Precautions

    NEO Stone Sealer (solvent based) is flammable but contains no toxic substances.
    This product is not recommended for use on floors or exterior surfaces use NEO Stone Sealer (water based)(ss11) instead.
  9. Disclaimer

    NEO Paints can not be held liable if the product fails due to improper surface preparation or application.